Availability: In stock
12V/24V auto-sensing DC, omnidirectional low-power draw fan for boats and RVs. Made in Canada.
Availability: In stock
12V/24V auto-sensing DC, omnidirectional low-power draw fan for boats and RVs. Made in Canada.
Go farther, stay longer, and enjoy more time doing what you love with the people you love. The Sirocco II is a powerful, class-leading fan designed for marine and RV use. The versatile 12V/24V (auto-sensing) Sirocco II features an innovative gimbaled design for 360° directional airflow across three-speed settings providing unmatched comfort. For peace of mind, the fan puts minimal strain on batteries, drawing just 0.35A on its highest 12V setting, and is ultra quiet, with four auto-off options (3, 6, 9, and 12 hours) for a restful night’s sleep. The fan stows flat at 3.8”, and the 7” blades are FingerSafe™. New for 2023: Sirocco II is here for your journey with an extended 3-Year warranty! Proudly made at Caframo in Canada.
Innovative gimbaled design offers complete 360° airflow.
Sleep in comfort with four-timer settings.
Ultra-low power draw. Run continuously without risking battery burnout.
FingerSafe™ blades with open grill for unobstructed airflow.
Weight (LBS) | 2.75 |
---|---|
UOM | EA |
UPC | 062503701013 |
CFM | 185 |
Product Color | Black |
Power Supply (V) | 12/24 V Auto Sensing |
Speed Settings | 3 |
Current Draw on Low | 0.06A (24V) and 0.12A (12V) |
Current Draw on High | 0.21A (24V) and 0.35A (12V) |
Airflow on Low | 125 CFM (212 m3/hr) |
Airflow on High | 185 CFM (314 m3/hr) |
Connection Type | Direct Wire |
Limited Warranty | 3 Year |
Height (IN) | 12.25 |
Length (IN) | 3.75 |
Width (IN) | 9.5 |
Our marine fans are low-voltage fans that do not plug into the grid; therefore, they do not require CSA or UL certifications.
The body of each fan is made from plastic. Depending on the fan, the plastic used may be FR ABS or ASA. The blades are made of polyethylene.
No. Our fans are not 'ignition proof' certified or tested. In an engine room, there is always the risk of having fuel and hydrocarbon fumes. For this reason, we do not recommend our fans be used in this environment. Our fans use a brushed motor, with an expected brush life of 5000 to 7500 hours. Operating the fans 24-hours will wear the brushes in a shorter time frame than the normally expected duty cycle.
Yes! The 747/757 Ultimate Fans, 817 Kona or 7482 Maestro Fan would be suitable.
The Sirocco II fan is equipped with a brushed motor.
Yes. Please turn off the power to the fan before cleaning. A vacuum can clear the fan of any dust build-up, and a dry cloth may be used to wipe the surface. Do not use gasoline, thinner or other harsh chemicals to clean the fan, as this can damage the motor and the plastic.
The Sirocco II fan must be mounted. The fan has a backing plate that can be affixed to the mounting surface using six #6 fasteners/screws.
The Sirocco II features a long life motor with low-power draw, and is designed to function for 5000+ hours.
The gauge of wire required for installation is 22AWG.
Yes, you can mount it horizontally or vertically. It should not cause the fan to make any excessive noise.
The dimensions of the Sirocco II are approximately 9.5" W x 3.75" L x 12.25" H (241.3mm x 95.25mm x 311.15mm).
When stowed flat, the fan measures 3.8" (97mm).
Please ensure that you choose a speed setting after the calibration. If the unit does not start spinning automatically after calibration, please get in touch with our Customer Service Team. Each time the power is disconnected from the fan, it will re-calibrate.
The amp draw for the Sirocco II Fan is as follows;
Yes. You will need to remove the back motor cover plate and switch the wires around on the back of the motor. No soldering is involved as the wires attach to the motor with clips. This should fix the problem and keep both fans wired to the supply line.
The CFM for each speed setting are as follows;