Availability: In stock
Compact 12V DC fan for powerful airflow in small spaces. Low-power draw fan with 5,000-hour motor life. Made in Canada.
The Bora is a beloved airflow solution for mariners worldwide. This direct-wire, high-performance cabin fan is the quietest and most powerful marine fan in its class, and its compact design handles any onboard airflow challenge. Featuring a long-life motor with center push-button control and a built-in handle for up-down, side-to-side positioning. Available in 12V and 24V options. Proudly made by Caframo in Canada.
High-efficiency blade design provides outstanding airflow.
Fits in tight corners to get airflow when you need it most.
Easy access on/off button positioned at center.
Powerful airflow in a compact design.
| Weight (LBS) | 1.59 |
|---|---|
| UOM | EA |
| UPC | 062503748032 |
| CFM | 130 |
| Product Color | White |
| Power Supply (V) | 12 V |
| Speed Settings | 3 |
| Current Draw on Low | 0.15A |
| Current Draw on High | 0.27A |
| Airflow on Low | 100 CFM |
| Airflow on High | 130 CFM |
| Connection Type | Direct Wire |
| Limited Warranty | 2 Year |
Our marine fans are low-voltage fans that do not plug into the grid; therefore, they do not require CSA or UL certifications.
The part that you are referring to is a ferrite bead. The ferrite bead is required to meet Electromagnetic immunity and emission compliance requirements by the Canadian Standards Association (CSA) and must not be removed. Without this ferrite bead, other electronic devices near the fan may experience electromagnetic interference when operating. This will vary with the specific equipment and proximity to the fan. You can cut the heat shrink tubing off to eliminate some of the bulk surrounding the ferrite. Arrange the wires so that two are on the side and one is on the opposite side. This will allow it to lay flatter.
The body of each fan is made from plastic. Depending on the fan, the plastic used may be FR ABS or ASA. The blades are made of polyethylene.
No. Our fans are not 'ignition proof' certified or tested. In an engine room, there is always the risk of having fuel and hydrocarbon fumes. For this reason, we do not recommend our fans be used in this environment. Our fans use a brushed motor, with an expected brush life of 5000 to 7500 hours. Operating the fans 24-hours will wear the brushes in a shorter time frame than the normally expected duty cycle.
Yes! The 747/757 Ultimate Fans, 817 Kona or 7482 Maestro Fan would be suitable.
The dimensions of the fan are approximately: 6.5" W x 3" L x 9.5" H, (165.1mm x 76.2mm x 241.3mm).
The current draw for the 12V unit is as follows;
Low: 0.15A
Medium: 0.18A
High: 0.27A
The current draw for the 24V unit is as follows;
Low: 0.06A
Medium: 0.10A
High: 0.18A
The Bora Fan offers the following CFM;
Low: 100 CFM
High: 130 CFM
The motor is designed to function for 5000+ hours.
