Kona 24V, Black

SKU#:

817CA24BBX

Availability: In stock

USD$199.99
-
+
Overview

Marine fan with a watertight motor. IP55 rated against dust and spray. Includes 6' 24V lighter plug. Made in Canada.

The Kona fan was built to withstand the most demanding marine environments. A watertight three-speed motor, aluminum construction, UV-stabilized plastic, and stainless fasteners ensure
long service life. The Kona pivots to pinpoint airflow and is ideal for use in the wheelhouse, exposed bridge, cockpit, or on the dash.
Available in 12V or 24V options.

Built for demanding marine use.
Provides cockpit air circulation in severe conditions.
Leave it outdoors worry-free in harsh, wet conditions.
Ultra-low current draw won't drain batteries.
2-Year warranty and outstanding customer support.

  • Watertight motor
  • IP55 rated for protection from dust and spray
  • 6' cord with lighter plug connection
  • 150 CFM on high (255 m³/hr)
  • 3 speed settings
  • Current draw on high: 0.18A
  • Current draw on low: 0.08A
  • Includes cam lock suction cup or permanent mount options
  • Aluminum construction with UV stabilized plastic and stainless fasteners

Product dimensions: 7.0" x 7.5" x 9.5" (177 mm x 190.5 mm x 241 mm)

More Information
Weight (LBS) 3.04
UOM EA
UPC 062503817226
CFM 150
Product Color Black
Power Supply (V) 24 V
Speed Settings 3
Current Draw on Low 0.08A
Current Draw on High 0.18A
Airflow on Low 110 CFM
Airflow on High 150 CFM
Connection Type Lighter Plug Adapter
Limited Warranty 2 Year
Write Your Own Review
You're reviewing:Kona 24V, Black
Your Rating

1. Do your fans have a CSA or UL rating?

Our marine fans are low-voltage fans that do not plug into the grid; therefore, they do not require CSA or UL certifications.

2. What is the cylinder-shaped component of the cord?

The part that you are referring to is a ferrite bead. The ferrite bead is required to meet Electromagnetic immunity and emission compliance requirements by the Canadian Standards Association (CSA) and must not be removed. Without this ferrite bead, other electronic devices near the fan may experience electromagnetic interference when operating. This will vary with the specific equipment and proximity to the fan. You can cut the heat shrink tubing off to eliminate some of the bulk surrounding the ferrite. Arrange the wires so that two are on the side and one is on the opposite side. This will allow it to lay flatter.

3. What are your fans made of?

The body of each fan is made from plastic. Depending on the fan, the plastic used may be FR ABS or ASA. The blades are made of polyethylene.

4. Can your fans be used to ventilate my engine room, running for a minimum of 24 hours a day?

No. Our fans are not 'ignition proof' certified or tested. In an engine room, there is always the risk of having fuel and hydrocarbon fumes. For this reason, we do not recommend our fans be used in this environment. Our fans use a brushed motor, with an expected brush life of 5000 to 7500 hours. Operating the fans 24-hours will wear the brushes in a shorter time frame than the normally expected duty cycle.

5. Do you offer a fan that will turn on automatically if the power is cut off and restored? Which models offer this?

Yes! The 747/757 Ultimate Fans, 817 Kona or 7482 Maestro Fan would be suitable.

6. What is the Kona fan made of?

The plastic components of the fan are made of ASA Plastic.

Acrylic-Styrene-acrylonitrile (ASA) polymers are amorphous plastics with mechanical properties similar to ABS resins. However, the ASA properties are far less affected by outdoor weathering. ASA is a terpolymer that can be produced by either a patented, proprietary reaction process or by a grafting process.

7. What is the current draw for the Kona Fan?

The current draw for the Kona fan is as follows;

12V: 0.21, 0.26 and 0.37 amps (3 speed)

24V: 0.11 to 0.18 amps (Variable speed) 

8. How long is the power cord on the Kona Fan?

The Kona is equipped with a 6-foot power cord with lighter plug connection. 

9. What are the dimensions of the Kona fan?

The dimensions of the Kona fan are approximately 7" W x 7.5" L x 9.5" H (177 mm x 190.5 mm x 241 mm).

10. What is the usable voltage range for the 12V & 24V Kona model fans?

Caframo 12V model fans will operate within a range of 9-15V. Our 24V model fans will operate within a range of 18-30V.  

Please note: 

- In most cases, the fan may operate slower in a low-voltage situation.

- Operation above 14V for our 12V models and 28V for 24V models is not recommended for continuous use. Operating at these levels with elevated temperatures (>30⁰C / 86⁰F ) may cause damage to the product.

Product Manuals
pdf
(Size: 1.3 MB)
Product Manual Kona Weatherproof Fan

We have noticed that you may be visiting us from a location that is not available to this online store. Would you like to be redirected to the proper online store for your location?